Полигон-2

[q]

This jumper block changes the output of the on-board voltage regulator. Pins 1-2 should be
jumpered for processors that require standard voltage regulation. Pins 2-3 should be jumpered for
processors that require the VRE specification. This jumper should not be changed by the user
unless changing to a new processor type. Some upgrade processors may require a different setting.
Check the processor's documentation for the correct setting. (Standard = 3.135-3.63V,
VR = 3.3-3.465V, VRE = 3.465-3.63V)

[/q]

[q]

On the Pentium® processor there is a S-Spec number usually followed
by a series of letters such as V/SS or S/SS. The V would stand for VRE,
the S is the standard setting.

[/q]