Полигон-2

Оффтопик: Оффтопик: Linux version 2.6.29.6-smp (root@midas) (gcc version 4.3.3 (GCC) ) #2 SMP Mon Aug 17 00:52:54 CDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
DMI 2.0 present.
last_pfn = 0x20000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 20000000 @ 7000-b000
ACPI Error (tbxfroot-0219): A valid RSDP was not found [20081204]
0MB HIGHMEM available.
512MB LOWMEM available.
mapped low ram: 0 - 20000000
low ram: 00000000 - 20000000
bootmap 00002000 - 00006000
(8 early reservations) ==> bootmem [0000000000 - 0020000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000b30674] TEXT DATA BSS ==> [0000100000 - 0000b30674]
#4 [0000b31000 - 0000b35000] INIT_PG_TABLE ==> [0000b31000 - 0000b35000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000007000 - 0000007000] PGTABLE
#7 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
found SMP MP-table at [c00f7ef0] 000f7ef0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00020000
HighMem 0x00020000 -> 0x00020000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00020000
On node 0 totalpages: 130975
free_area_init_node: node 0, pgdat c09da700, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125984 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: INTEL
MPTABLE: Product ID: PR440FX
MPTABLE: APIC at: 0xFEC08000
Processor #0 (Bootup-CPU)
Processor #12
I/O APIC #13 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129951
Kernel command line: BOOT_IMAGE=Linux ro root=342 vt.default_utf8=0
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 198.650 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 508552k/524288k available (6817k kernel code, 15128k reserved, 2484k data, 456k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
.init : 0xc0a22000 - 0xc0a94000 ( 456 kB)
.data : 0xc07a8437 - 0xc0a15520 (2484 kB)
.text : 0xc0100000 - 0xc07a8437 (6817 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 397.30 BogoMIPS (lpj=198650)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=-1 pin1=-1 apic2=0 pin2=0
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel Pentium Pro stepping 09
Booting processor 1 APIC 0xc ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 397.28 BogoMIPS (lpj=198640)
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium Pro stepping 09
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (794.58 BogoMIPS).
net_namespace: 956 bytes
xor: measuring software checksum speed
8regs : 328.000 MB/sec
8regs_prefetch: 296.000 MB/sec
32regs : 200.000 MB/sec
32regs_prefetch: 168.000 MB/sec
xor: using function: 8regs (328.000 MB/sec)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab >bio-0> at 0
ACPI: Interpreter disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:0b.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:0f.0: reg 10 32bit mmio: [0xffbed000-0xffbedfff]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.0: PME# disabled
pci 0000:00:0f.1: reg 10 32bit mmio: [0xffbee000-0xffbeefff]
pci 0000:00:0f.1: supports D1 D2
pci 0000:00:0f.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.1: PME# disabled
pci 0000:00:0f.2: reg 10 32bit mmio: [0xffbef800-0xffbef8ff]
pci 0000:00:0f.2: supports D1 D2
pci 0000:00:0f.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.2: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:00:11.0: reg 14 32bit mmio: [0xffbefc00-0xffbefcff]
pci 0000:00:11.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:11.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pnp: PnP ACPI: disabled
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 3974, nTxLock = 31798
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Aug 17 2009 00:51:32) installed
msgmni has been set to 993
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:07.0: Activating ISA DMA hang workarounds
pci 0000:00:0b.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
00 card 'Gravis Ultrasound Plug'n'Pray'
isapnp: 1 Plug & Play card detected total
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
piix 0000:00:07.1: IDE controller (0x8086:0x7010 rev 0x00)
piix 0000:00:07.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: HP DVD Writer 840b, ATAPI CD/DVD-ROM drive
hdb: ST380011A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: MWDMA2 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hdb: max request size: 512KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 hdb4
ide-cd driver 5.00
ide-cd: hda: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fcoe_transport_register:fcoesw
Adaptec aacraid driver 1.1-5[2456]-ms
scsi: >fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options>6>QLogic Fibre Channel HBA Driver: 8.03.00-k4
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright© 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 0003 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 1535 EST 2006)
megasas: 00.00.04.01 Thu July 24 1151 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright © 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0f.2: EHCI Host Controller
ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.2: irq 9, io mem 0xffbef800
ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 0.95
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:0f.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.0: irq 11, io mem 0xffbed000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:0f.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0f.1: OHCI Host Controller
ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0f.1: irq 10, io mem 0xffbee000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6-smp ohci_hcd
usb usb3: SerialNumber: 0000:00:0f.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
usb 2-1: new low speed USB device using ohci_hcd and address 2
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 62 MB/s
raid6: int32x2 74 MB/s
raid6: int32x4 62 MB/s
raid6: int32x8 54 MB/s
raid6: using algorithm int32x2 (74 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
usb 2-1: New USB device found, idVendor=2188, idProduct=0ae1
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: configuration #1 chosen from 1 choice
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0/input/input2
EXT3-fs: hdb2: couldn't mount because of unsupported optional features (240).
EXT2-fs: hdb2: couldn't mount because of unsupported optional features (240).
generic-usb 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:0f.0-1/input0
EXT4-fs: barriers enabled
kjournald2 starting: pid 1327, dev hdb2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem hdb2 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 3:66.
Freeing unused kernel memory: 456k freed
Console: switching to colour frame buffer device 80x30
fb0: S3 Virge/VX on 0000:00:0b.0, 6 MB RAM, 55 MHz MCLK
mtrr: base(0xf8000000) is not aligned on a size(0x600000) boundary
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:11.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xe0aeac00, d8:5d:4c:80:65:0d, XID 10000000 IRQ 10
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
Adding 5253244k swap on /dev/hdb3. Priority:-1 extents:1 across:5253244k
fuse init (API version 7.11)
EXT4 FS on hdb2, internal journal on hdb2:8
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Linux agpgart interface v0.103
NET: Registered protocol family 10
lo: Disabled Privacy Extensions

Оффтопик: Оффтопик:
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:0b.0 VGA compatible controller: S3 Inc. 86c988 [ViRGE/VX] (rev 02)
00:0f.0 USB Controller: NEC Corporation USB (rev 41)
00:0f.1 USB Controller: NEC Corporation USB (rev 41)
00:0f.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

Оффтопик: Оффтопик:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2188:0ae1
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Оффтопик: Оффтопик:
...
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: New USB device found, idVendor=0a16, idProduct=9393
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: TDMINIG2
usb 1-2: Manufacturer: TREK
usb 1-2: SerialNumber: 0603271201223
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access TREK TDMINIG2 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sda] 2045952 512-byte hardware sectors: (1.04 GB/999 MiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] 2045952 512-byte hardware sectors: (1.04 GB/999 MiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda4
sd 2:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
sd 2:0:0:0: Attached scsi generic sg0 type 0

Оффтопик: Оффтопик:
Bus 001 Device 003: ID 0a16:9393 Trek Technology (S) PTE, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2188:0ae1
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Оффтопик: Оффтопик:
...
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
usb 1-2: reset high speed USB device using ehci_hcd and address 3
...