Полигон-2

У меня в BIOS выйти просто,на клаве есть кнопка"SETUP"-работает при загрузке,а если позже нужно зайти-тогда "Alt+SETUP" или "Ctrl+SETUP"точно не помню.в BIOS можно:
включить или выключить -FDD 3.5 и 5.25,HDD и CD-ROM.
по монитору и по адаптеру-LCD или CRT(MDA,EGA,CGA,VGA).
вид курсора
порядок портов-2.1.2или 2.2.1 и т.д.
по памяти-обьём ОЗУ
и ещё что-то непомню уже,давно не включал
нашёл вот такую справку в инете:
However it was never fitted with an internal floppy disk drive (like a few other Sharp portables). Many people have asked me how to overcome this problem but there is unfortunately not an easy or cheap answer,
Originally Sharp supplied an external disk drive (CE-621F) but these are now almost impossible to obtain. Central Business machines last sold these a few years back for Ј234. The Texas Travelmate 2000 was an almost identical machine so peripherals for this can be used.
It is now possible to get disk drives which connect to the printer port. Prices have reduced slightly in recent years but these still cost around Ј130. Models I have read about such as the MicroSolutions Backpack are mains powered and therefore not completely portable, however the cost may be offset if they can be used on more than one computer. I have also read of battery powered models that connect to the serial port but these are slow (9600 BPS) and expensive (Ј200 plus). Also the PC-6220 has a non standard parallel port and not everyone will have the adapter that was originally supplied with the PC-6220. Although the original is not available a compatible cable can be obtained from Oakleigh Systems on 01384 444727.
There is also a wide range of hard disk and |CD ROM drive that can be connected to the printer port.
A cheaper but far bulkier alternative is to use a desktop PC as a host for the disk drive. In fact, at a push, only the system unit without a monitor or keyboard, will work. Such unit can now be obtained very cheaply but only later (and dearer) units will, have 1.44 Mb disk drives needed for the latest software. The PC-6220 includes LapLink 2 for file transfer and also DD which makes remote drivers appear as though they are on the local machine. The necessary serial cable was originally supplied with the PC-6220 but a replacement can easily be obtained or made from scratch. Users of DOS 6.x can also use INTERLINK (by the way this doesn’t work with remote CD ROM drives).
If the remote desktop is only a system unit, the software will need to be set to run automatically on start-up using the AUTOXEC .BAT file. Access to a fully equipped desktop will be needed to create a boot disk but if anyone find this a problem I will be happy to help.
И,если я правильно понял,то можно CD-ROM подключить через паралельный порт,но как разгадать разводку разьёма?

кстати у меня судя по биосу можно подключит до 4 ide устройств и до 2 флопарей причем начиная 180Кб

[q]

а флопик можно так цеплять

[/q]

как его включить? нет распиновки разьёма

[q]

дак раз биосе есть параметр харда попробуй с ним поиграть - хуже не будет

[/q]

параметров нет(не видно),можно только поменять местами CD-ROM с HDD
(Сообщение отредактировал Arseny 4 мая 2007 18:05)

[q]

There is also a wide range of hard disk and |CD ROM drive that can be connected to the printer port

[/q]

Речь идет о вымерших ныне карманах LPT-IDE (с приходом USB, это и так немногочисленное семейство совсем исчезло). Впрочем, я в инете видел схемки таких девайсов и драйверы под них

Я так ничего и не понял.Придётся его списать в утиль.Всем спасибо