Полигон-2

В городе хоть каком плату мучаете? А то у меня есть запасной банк 512Мб(4х128) нужной памяти.

поставил другу оперативу, начался запускатся но вот следующее, не хочет грузится с жесткого, пробовали другой NVRAM с ним пошол а с родным не хочет

Found Bus 1 (PCI B) Vendor/DevID = 47521002 @ 1fe01011000
Found Bus 1 (PCI B) Vendor/DevID = 710110b9 @ 1fe01011800
Found Bus 1 (PCI B) Vendor/DevID = 153310b9 @ 1fe01013800
Found Bus 1 (PCI B) Vendor/DevID = 545110b9 @ 1fe01014000
Found Bus 1 (PCI B) Vendor/DevID = 1100108e @ 1fe01016000
Found Bus 1 (PCI B) Vendor/DevID = 522910b9 @ 1fe01016800

Processor Speed = [Speed Jumper = 4] 548 MHz

Firmware CORE Sun Microsystems, Inc.
@(#) core 1.1.2 2003/08/22 16:06
Hardware Power ON
Verifying NVRAM...Done
MCR0 = 56a0c206
MCR1 = 80008000
MCR2 = cf2000f0
MCR3 = 8a
Ecache Size = 512 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
FPU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x40000000
MEMSIZE=0x20000000
Data Line Test
Core Memory Test
Clearing memory...including Unix retained memory...Done
Turning ON MMUs Done
Copy ROM to RAM (178032 bytes) Done
Orig PC=0x1fff00088ec New PC=0xf0f08944
Processor Speed=548MHz
Memory Data Line Test
Memory Addr Line w/ Ecache Test
ECC Block Memory Test
Looking for Dropin cPOST ... found
Copying Client...Done
Transferring control to Client...

Sun Microsystems, Inc. cPOST
@(#) cpost 1.0.5 2005/04/06 11:09


All Basic UltraSPARC IIe PBM Tests
Init CPU PBM
PIO Decoder And BCT Test
CPU IOMMU Reg Test
CPU IOMMU RAM NTA Test
CPU IOMMU CAM NTA Test
CPU IOMMU RAM Address Test
CPU IOMMU CAM Address Test
IOMMU TLB Compare Test
IOMMU TLB Flush Test
PBM Control/Status Reg Test
PBM Diag Reg Test
CPU PBM Reg Test
Init PCI
Bus 1, Dev 2, VENDOR = 1002, DeviceID = 4752
Bus 1, Dev 8, VENDOR = 10b9, DeviceID = 5451
Bus 1, Dev c, VENDOR = 108e, DeviceID = 1100
Bus 1, Dev d, VENDOR = 10b9, DeviceID = 5229

All Basic RIO Tests (RIO# 1)
RIO Ebus Config Space Reg Test
RIO Network Config Space Reg Test
RIO Firewire Config Space Reg Test
RIO USB Config Space Reg Test
Basic SouthBridge Tests
Southbridge ISA Config Space Reg Test
Southbridge PMU Config Space Reg Test
Southbridge IDE Config Space Reg Test
Southbridge Audio Config Space Reg Test
All Memory Stress Tests
Consist Write Data Test
Resetting...
Found Bus 1 (PCI B) Vendor/DevID = 47521002 @ 1fe01011000
Found Bus 1 (PCI B) Vendor/DevID = 710110b9 @ 1fe01011800
Found Bus 1 (PCI B) Vendor/DevID = 153310b9 @ 1fe01013800
Found Bus 1 (PCI B) Vendor/DevID = 545110b9 @ 1fe01014000
Found Bus 1 (PCI B) Vendor/DevID = 1100108e @ 1fe01016000
Found Bus 1 (PCI B) Vendor/DevID = 522910b9 @ 1fe01016800

Processor Speed = 548 MHz

Firmware CORE Sun Microsystems, Inc.
@(#) core 1.1.2 2003/08/22 16:06
Software Power ON
Verifying NVRAM...Done
MCR0 = 56a0c206
MCR1 = 80008000
MCR2 = cf2000f0
MCR3 = 8a
Ecache Size = 512 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x40000000
MEMSIZE=0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (178032 bytes) Done
Orig PC=0x1fff00088ec New PC=0xf0f08944
Processor Speed=548MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...

ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom
Probing Memory Bank #0 0 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 0 Megabytes
Probing for User PROMs:
Probing /pci@1,1 Device 7 isa dma floppy parallel power serial serial
8042 kb_ps2 kdmouse
Probing /pci@1,1 Device c network firewire usb
Probing /pci@1,1 Device 3 pmu i2c winbond dimm motherboard-fru pmc-fru
ppm beep watchdog
Probing /pci@1,1 Device d ide disk cdrom
Probing /pci@1,1 Device 5 Nothing there
Probing /pci@1,1 Device 2 SUNW,m64B
Probing /pci@1,1 Device 8 sound
Probing /pci@1 Device 8 Nothing there
Probing /pci@1 Device 5 Nothing there
Probing /pci@1 Device 6 Nothing there
Probing /pci@1 Device 7 Nothing there

PS/2 keyboard check: fe
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom
Probing Memory Bank #0 0 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 0 Megabytes
Probing for User PROMs:
Probing /pci@1,1 Device 7 isa dma floppy parallel power serial serial
8042 kb_ps2 kdmouse
Probing /pci@1,1 Device c network firewire usb
Probing /pci@1,1 Device 3 pmu i2c winbond dimm motherboard-fru pmc-fru
ppm beep watchdog
Probing /pci@1,1 Device d ide disk cdrom
Probing /pci@1,1 Device 5 Nothing there
Probing /pci@1,1 Device 2 SUNW,m64B
Probing /pci@1,1 Device 8 sound
Probing /pci@1 Device 8 Nothing there
Probing /pci@1 Device 5 Nothing there
Probing /pci@1 Device 6 Nothing there
Probing /pci@1 Device 7 Nothing there

PS/2 keyboard check: fe

PDSi,XIP Board Series (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #50738155.
Ethernet address 0:c0:7:6eb, Host ID: 830633eb.




Environment monitoring: disabled
Loading diagnostic script

****** OBDiag Script Start ******
Testing /pci@1f,0/pci@1,1/SUNW,m64B@2

Display not installed

Test hardware registers - passed Ok
Test RamDAC - passed Ok
Test Frame buffer - passed Ok
Testing /pci@1f,0/pci@1,1/ide@d
Testing /pci@1f,0/pci@1,1/pmu@3
Testing /pci@1f,0/pci@1,1/usb@c,3
Testing /pci@1f,0/pci@1,1/network@c,1
Testing /pci@1f,0/pci@1,1/ebus@c
Testing /pci@1f,0/pci@1,1/isa@7/serial@0,2e8
Testing /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
[Used as Console]
Testing /pci@1f,0/pci@1,1/isa@7/dma@0,0/parallel@0,378
Testing /pci@1f,0/pci@1,1/isa@7/dma@0,0/floppy@0,3f0

ERROR : Recalibrate failed. floppy missing, improperly connected, or defecti
ve.
DEVICE : /pci@1f,0/pci@1,1/isa@7/dma@0,0/floppy@0,3f0

Error: /pci@1f,0/pci@1,1/isa@7/dma@0,0/floppy@0,3f0 selftest failed, return c
ode = 1
Testing /pci@1f,0/pci@1,1/ebus@c/flashprom@10,0
****** OBDiag Script End ******

Resetting ...

Found Bus 1 (PCI B) Vendor/DevID = 47521002 @ 1fe01011000
Found Bus 1 (PCI B) Vendor/DevID = 710110b9 @ 1fe01011800
Found Bus 1 (PCI B) Vendor/DevID = 153310b9 @ 1fe01013800
Found Bus 1 (PCI B) Vendor/DevID = 545110b9 @ 1fe01014000
Found Bus 1 (PCI B) Vendor/DevID = 1100108e @ 1fe01016000
Found Bus 1 (PCI B) Vendor/DevID = 522910b9 @ 1fe01016800

Processor Speed = 548 MHz

Firmware CORE Sun Microsystems, Inc.
@(#) core 1.1.2 2003/08/22 16:06
Software Power ON
Verifying NVRAM...Done
MCR0 = 56a0c206
MCR1 = 80008000
MCR2 = cf2000f0
MCR3 = 8a
Ecache Size = 512 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x40000000
MEMSIZE=0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (178032 bytes) Done
Orig PC=0x1fff00088ec New PC=0xf0f08944
Processor Speed=548MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...

ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom
Probing Memory Bank #0 0 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 0 Megabytes
Probing for User PROMs:
Probing /pci@1,1 Device 7 isa dma floppy parallel power serial serial
8042 kb_ps2 kdmouse
Probing /pci@1,1 Device c network firewire usb
Probing /pci@1,1 Device 3 pmu i2c winbond dimm motherboard-fru pmc-fru
ppm beep watchdog
Probing /pci@1,1 Device d ide disk cdrom
Probing /pci@1,1 Device 5 Nothing there
Probing /pci@1,1 Device 2 SUNW,m64B
Probing /pci@1,1 Device 8 sound
Probing /pci@1 Device 8 Nothing there
Probing /pci@1 Device 5 Nothing there
Probing /pci@1 Device 6 Nothing there
Probing /pci@1 Device 7 Nothing there

PS/2 keyboard check: fe
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom eeprom idprom
Probing Memory Bank #0 0 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 0 Megabytes
Probing for User PROMs:
Probing /pci@1,1 Device 7 isa dma floppy parallel power serial serial
8042 kb_ps2 kdmouse
Probing /pci@1,1 Device c network firewire usb
Probing /pci@1,1 Device 3 pmu i2c winbond dimm motherboard-fru pmc-fru
ppm beep watchdog
Probing /pci@1,1 Device d ide disk cdrom
Probing /pci@1,1 Device 5 Nothing there
Probing /pci@1,1 Device 2 SUNW,m64B
Probing /pci@1,1 Device 8 sound
Probing /pci@1 Device 8 Nothing there
Probing /pci@1 Device 5 Nothing there
Probing /pci@1 Device 6 Nothing there
Probing /pci@1 Device 7 Nothing there

PS/2 keyboard check: fe

PDSi,XIP Board Series (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #50738155.
Ethernet address 0:c0:7:6eb, Host ID: 830633eb.




Environment monitoring: disabled
Executing last command: boot
Boot device: net File and args:
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be upd
ated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Link hasn't comeup yet.
Evaluating: boot

Can't open boot device

Boot device: net File and args:
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be upd
ated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Link hasn't comeup yet.
Evaluating: boot

Can't open boot device

ok

Так он по сети пытается грузиться.

Про бут девайсы вот в ЭТОЙ ТЕМЕ достаточно нафлудили, нет смысла повторяться.

Типа того.

setenv boot-device disk вам в помощь.

Либо boot disk

Далее возможны варианты.

Ну дык что в итоге-то? Загрузилось?