Полигон-2

Кроме того, вот полезная информация из readme.txt о конфигурировании устройств EISA:


IBM, Corp.
EISA Configuration Diskette, README.TXT

The following topics are described in this file:

1) Change History
2) Hints on using the EISA Configuration Utility for Server 325/330
3) Utilities included with this diskette


2) Hints on using the EISA Configuration Utility for Server 325/330
   ================================================================

   Configuring PCI Devices
   -----------------------
   PCI devices shown in the EISA Configuration Utility are view-only.
   Although the EISA Configuration Utility displays the "+/-" symbol
   for PCI devices, changes to these fields do not affect the PCI devices
   resources.  The PCI BIOS configures the PCI devices automatically during
   boot up.

   If you need to change the IRQ for a PCI device, use the PCI Interrupt
   Request function in the built-in Configuration/Setup Utility.  You
   can manually assign IRQs to PCI devices when required or when control
   over IRQ sharing among PCI devices is desired.  This function can be found
   in the Configuration/Setup (F1 from the bootup LOGO screen) by selecting
   Advanced Setup, and then selecting PCI Bus Control.


   Configuring I/O Ports and System Devices
   ----------------------------------------
   The I/O Ports and System Devices (serial ports, IR port, parallel port,
   and the floppy diskette drive(s)) require configuration in both the
   built-in Configuration/Setup Utility and the EISA Configuration Utility.

   If you change the configuration of the I/O Ports or System Devices
   using the EISA Configuration Utility (for example, if you change the
   Parallel Port from LPT1 to LPT2), you must make the same change in the
   built-in Configuration/Setup Utility, to keep the CMOS settings in the
   Configuration/Setup synchronized with the settings in the EISA NVRAM.



3) Utilities included with this diskette
   =====================================

   BOARDID.EXE  -   This utility reads the ID of EISA products plugged
                    into the system board. This is helpful in determining
                    if the system board recognizes the EISA cards. Also
                    the EISA card's ID explains what configuration file
                    is associated with the EISA product. Slot 0 corresponds
                    to the system board.

                    Usage:  BOARDID

                    Example:

                    1) Type BOARDID and press the return key.
                    2) Enter 0 for the slot number.
                    3) The ID should be read as IBM1038 !.
                    4) The configuration file that corresponds to the
                       system board is thus !IBM1038.cfg. This file
                       resides in the same directory as the CF.EXE file.
                    5) An ID that is read as "___???? !" means that the
                       utility did not recognize a valid\working EISA
                       product in that slot.



   CHECKCFG.EXE -   This utility checks configuration files (*.CFG) for a
                    valid syntax.

                    Usage:  CHECKCFG (path)\filename.CFG

                    Example:

                    1) Type CHECKCFG A:\!IBM1038.CFG - That is the
                       configuration file for the M54Pe system board.
                    2) The message returned should be "Successful syntax
                       verification."
                    3) If an error message appears, contact the EISA
                       product's manufacturer for a new configuration
                       file.



   CLRCMOS.EXE  -   This utility is used to clear the EISA CMOS. Run this
                    program if you are having lots of problems with the
                    configuration utility (CF.EXE).

                    !!! Warning !!!
                    This utility writes 0's to the EISA CMOS, effectively
                    clearing it. All configuration information will be
                    lost. The sytem must be reconfigured by running the
                    CF.EXE utility after this program is executed.

                    DO NOT USE THIS UTILITY UNLESS ABSOLUTELY NEEDED!!!
                    USE ONLY AS A LAST RESORT.

                    Usage:  CLRCMOS



   CLEARRTC.COM  -  This utility is used to clear the Real Time Clock
                    chips Non-Volatile Random Access Memory (NVRAM).

                    !!! Warning !!!
                    This utility sets the NVRAM to zero, effectively
                    clearing it. All configuration information will be
                    lost. The sytem must be reconfigured by running the
                    ROM-based Setup utility and the CF.EXE utility after
                    this program is run.

                    DO NOT USE THIS UTILITY UNLESS ABSOLUTELY NEEDED!!!
                    USE ONLY AS A LAST RESORT.

                    Usage:   CLEARRTC

В принципе можно собрать все на свободном FTP от проекта DECUServe ( ftp://eisner.decus.org/ecu/ ) Лежат они там под логином Icarus, а пароль я вышлю по письму в личку.
Что там есть:
10017v0.exe\t382 kB\t18.03.11 11: 43 :00 - ЭКУ Интел Экспресс 1.00.17
10018bi0.exe\t536 kB\t18.03.11 11: 43 :00 - ЭКУ Интел Экспресс 1.00.18
274xa.exe\t27.0 kB\t18.03.11 11: 43 :00
aswc174.exe\t156 kB\t18.03.11 11: 43 :00 - Адаптековске ЭКУ
aswc274.exe\t40.5 kB\t18.03.11 11: 43 :00 - Еще одна
inecu294.zip\t461 kB\t18.03.11 11: 43 :00 - ЭКУ Интел 2.9.4
intecu21.zip\t424 kB\t18.03.11 11: 43 :00
intecu23.zip\t454 kB\t18.03.11 11: 43 :00
intecu24.zip\t413 kB\t18.03.11 11: 44 :00
intecu27.zip\t427 kB\t18.03.11 11: 44 :00
motherboards_server_xpress_altserver.zip\t101 kB\t18.03.11 11:44:00
s340130a.exe\t322 kB\t18.03.11 11:44:00
s350340.exe\t297 kB\t18.03.11 11:44:00

Выложил ECU от ASUS PCI/E-P54NP4:
http://rapidshare.com/files/45...SACONF.zip
Внутри:
- собственно ECU и конфигурационные файлы для материнской платы (этой и нескольких других от ASUS)
- конф.файл для ASUS EISA-L500 Ethernet LAN ADAPTER
- конф.файл и оверлей для Adaptec AHA-2740/2742/2744 SCSI Host Adapter
- для DTC2290 EISA IDE Controller
- Intel EtherExpress™ PRO/100 LAN Adapter
- Intel EtherExpress™ 10 ISA LAN Adapter
- Matrox Studio Express JPEG Card (Rev 2.0)
- HP ScanJet Plus Interface (88290A)
- HP ScanJet II Interface (C1752A)

Может, проверить/заменить батарейку?

MEGAHERZ Тем более